Bosch GSB 13 RE 600W Impact Drill 230V
Professional impact drill providing maximum power, versatility and precision at an extremely light 1.8kg in weight. Robust metal twin-sleeve keyless chuck provides quick and easy accessory changes for excellent productivity. Features a speed pre-selection setting wheel to make working with different materials trouble-free and effortless. Also features electronic control for exact pilot drilling. Supplied with auxiliary handle and depth stop.
•600W
•Single-Speed Variable & Reverse
•1.5-13mm Keyless Chuck
•Lock-On Switch
•All-Metal Gearbox
•Soft-Grip Handle
Long Slugger Bit Pilot Bit
Power Tools > Drilling > Slugger Bit
JEFSLGPILOTL
Large slugger pilots bit
Short Slugger Bit Pilot Bit
Power Tools > Drilling > Slugger Bit
JEFSLGPILOTS
Small slugger pilot bit
65MM Magnetic Drill 230V
Power Tools > Drilling > Magnetic Drills
JEFMAGD65HD/110
Maximum Core Drill Diameter: 65mm. Maximum Tapping Diameter: M20mm. Maximum Twist Drill Diameter: 25mm. Maximum Cutting Depth: 50mm. Input Voltage: 110V. Magnetic Adhesion: 15,800N. Motor Power / Speed: 1890W. No Load Speed: 100-180/500rpm. Dimensions: 39 x 11 x 39cm. Weight: 28kg
410 /SEL19-SET OF 19 TWIST DRILLS 410
Power Tools > Drilling > Drilling
410/SEL19
Set of twist drills with cylindrical shanks (item 410)- 1-10 x 05 mm
410 AS/SEL21-SET 21 TWIST DRILLS 410AS
Power Tools > Drilling > Drilling
410AS_SE_L21
Set of twist drills with cylindrical shanks (item 410AS)- 1/16-5/64-3/32-7/64
1/8-9/64-5/32-11/64-3/16
13/64-7/32-15/64-1/4
17/64-9/32-19/64-5/16
21/64-11/32-23/64-3/8
410 MIX/SEL19-SET OF 19 TWIST DRILLS 410
Power Tools > Drilling > Drilling
410_MIXSE_L19
Set of 13 twist drills item 410 and 6 twist drills with hard metal insets
412 /C150-150 TWIST DRILLS 412 IN CASE
Power Tools > Drilling > Drilling
412/C150
Set of twist drills with cylindrical shanks (item 412) in case
412 /SP91-91 DRILLS 412 WITH DISPLAY
Power Tools > Drilling > Drilling
412/SP91
Set of twist drills with cylindrical shanks (item 412) in case- 1-10 x 010 mm
415 /C116-116 TWIST DRILLS 415 IN CASE
Power Tools > Drilling > Drilling
415/C116
Set of twist drills with cylindrical shanks (item 415) in case
415 /SP91-91 DRILLS 415 WITH DISPLAY
Power Tools > Drilling > Drilling
415/SP91
Set of twist drills with cylindrical shanks (item 415) in case- 1-10 x 010 mm
416 /SP19-19 DRILLS HSS WITH DISPLAY
Power Tools > Drilling > Drilling
416/SP19
Set of 19 drills HSS specially ground with double penetration cone- 1-10 x 05 mm
417 /SP8-8 DRILLS 417 WITH DISPLAY
Power Tools > Drilling > Drilling
417/SP8
Set of helical cylindrical masonry drill bits (item 417) in case- 3-4-5-6-8-9-10-12 mm
Ground centre drill bits, 60° countersink angle, made of HSS
Power Tools > Drilling >
422_1-60
​Quick, safe centre holes
• For quick, safe centre holes
• Reduced breaking
• Right edge with 118° cutting angle
• For drilling steel and metal
-ø 1.6 mm
-D 4 mm
-L 35.5 mm
** SPECIAL OFFER PRICE **
Ground centre drill bits, 60° countersink angle, made of HSS
Power Tools > Drilling >
422_2-50
Quick, safe centre holes
• For quick, safe centre holes
• Reduced breaking
• Right edge with 118° cutting angle
• For drilling steel and metal
** SPECIAL OFFER PRICE **
Ground centre drill bits, 60° countersink angle, made of HSS
Power Tools > Drilling >
422_3-15
​Quick, safe centre holes
• For quick, safe centre holes
• Reduced breaking
• Right edge with 118° cutting angle
• For drilling steel and metal
** SPECIAL OFFER PRICE **
426 MD/SP10-10 ROTARY FILES 426+DISPLAY
Power Tools > Drilling > Drilling
426MD/SP10
Set of 10 rotary files made from hard metal cross cut HM4426MD/CP-426MD/CT-426MD/F
426MD/T-426MD/S
- 8-12 mm
438 A-SET OF 7 BITS FOR DRILLING
Power Tools > Drilling > Drilling
438A
Set of bits for drilling threading and countersinking HSSM3 - M4 - M5 - M6 - M8 - M10
450 AD-ADAPTORS FOR ARBORS ITEM 450AL/1
Power Tools > Drilling > Drilling
450/AD
Adaptors for arbors item 450AL/1
450 /C13-13 PCS 450 FOR INSTALLERS
Power Tools > Drilling > Drilling
450/C13
Assortment of holesaws and accessories for installers
450 /C21-21 PCS 450 FOR INDUSTRIAL USE
Power Tools > Drilling > Drilling
450/C21
Assortment of holesaws and accessories for industrial use
450 /C9-9 PCS 450 FOR ELECTRICIANS
Power Tools > Drilling > Drilling
450/C9
Assortment of holesaws and accessories for electricians
450 PA/1-PILOT DRILLS FOR ARBORS 450AL/1
Power Tools > Drilling > Drilling
450PA/1
Pilot drills for arbors item 450AL/1 HSS
450 PA/2-PILOT DRILLS FOR ARBORS 450AL/2
Power Tools > Drilling > Drilling
450PA/2
Pilot drills for arbors item 450AL/2 HSS
450 PR-EXTENSION FOR HOLESAWS
Power Tools > Drilling > Drilling
450PR
Extension for holesaws
451 PA-PILOT DRILL FOR HOLE CUTTERS 451
Power Tools > Drilling > Drilling
451/PA
Pilot drill for hole cutters item 451 HSS
GSB18V-EC BATTERY DRILL
Power Tools > Drilling >
DRIL18V1X4AH
Brand::BOSCH
Bosch GSB 18V-EC 18V 2.0Ah Li-Ion Brushless Cordless Combi Drill
Lightweight and compact, the Bosch GSB cordless combi drill is perfect for tackling long or awkward jobs. Electronic Cell Protection prevents the battery from overload, overheating and deep discharge and Electronic Motor Protection means the tool will run for longer. An innovative 2-speed gearbox allows for powerful screwdriving or drilling in wood and metal, as well as impact drilling in masonry. The Bosch GSB cordless combi drill is equipped with an auto-lock chuck for fast bit changes and it comes with two rapid charge batteries that are ready to go in 65 minutes for maximum efficiency.
•2 x 2.0Ah Li-Ion Batteries
•2-Speed Variable & Reverse
•65min Charge Time
•13mm Auto-Lock Chuck
•19 Torque Settings + Drill + Hammer Drill
•Motor Brake
410 TWIST DRILLS CYLINDRICAL ROLLED
Power Tools > Drilling > Drill Bit
Twist drills with cylindrical shanks short series HSS rolled
410 AS TWIST DRILLS CYLINDER ROLLED
Power Tools > Drilling > Drilling
Twist drills with cylindrical shanks short series HSS rolled
410 ASSP DRILLS 410AS WITH DISPLAY
Power Tools > Drilling > Drilling
Set of twist drills with cylindrical shanks (item 410AS) in case- 1/16-5/64-3/32-7/64
1/8-9/64-5/32-11/64-3/16
13/64-7/32-15/64-1/4
17/64-9/32-19/64-5/16
21/64-11/32-23/64-3/8
410 SP DRILLS 410 WITH DISPLAY
Power Tools > Drilling > Drilling
Set of twist drills with cylindrical shanks (item 410) in case- 1-10 x 05 mm
412 TWIST DRILLS CYLINDER FINISHING
Power Tools > Drilling > Drilling
Twist drills with cylindrical shanks short series HSS entirely ground glossy finishing
412 A TWIST DRILLS CYLIND.BURNISHED
Power Tools > Drilling > Drilling
Twist drills with cylindrical shanks short series HSS entirely ground burnished
412 L TWIST DRILLS LONG BURNISHED
Power Tools > Drilling > Drilling
Twist drills with cylindrical shanks long series HSS entirely ground burnished
412 SP DRILLS 412 WITH DISPLAY
Power Tools > Drilling > Drilling
Set of twist drills with cylindrical shanks (item 412) in case- 1-10 x 05 mm
414 TWIST DRILLS SHORT ENTIRELY GROUND
Power Tools > Drilling > Drilling
Twist drills with cylindrical shanks short series HSS-TiN entirely ground
414 SP DRILLS 414 WITH DISPLAY
Power Tools > Drilling > Drilling
Set of twist drills with cylindrical shanks (item 414) in case- 1-10 x 05 mm
415 TWIST DRILLS CYLINDRICAL HSS-CO
Power Tools > Drilling > Drilling
Twist drills with cylindrical shanks short series HSS-CO 8% entirely ground
415 SP DRILLS 415 WITH DISPLAY
Power Tools > Drilling > Drilling
Set of twist drills with cylindrical shanks (item 415) in case- 1-10 x 05 mm
416 DRILL WITH CYLINDRICAL SHANK
Power Tools > Drilling > Drilling
Drill with cylindrical shank specially ground with two cutter pairs
417 HELICAL CYLINDRICAL MASONRY DRILL
Power Tools > Drilling > Drilling
Helical cylindrical masonry drill bits short series made from milled steel with hard metal plates
419 HAMMER DRILL BITS
Power Tools > Drilling > Drilling
Hammer drill bits with milled shanks and hard metal plates
423 SPECIAL END MILLS FOR WELDING HSS
Power Tools > Drilling > Drilling
Special end mills for welding HSS ground
423 A SPECIAL MILLS SPOT WELDING HSS
Power Tools > Drilling > Drilling
Special mills for spot welding HSS ground
424 CONICAL DRILL BITS HSS
Power Tools > Drilling > Drilling
Conical drill bits HSS
424 SP DRILL BITS 424 DISPLAY
Power Tools > Drilling > Drilling
Set of conical drill bits (item 424) in case424/1+424/2+424/3
- 3-30 mm
425 STEPPED DRILLS HSS
Power Tools > Drilling > Drilling
Stepped drills HSS
425 SP DRILLS 425 WITH DISPLAY
Power Tools > Drilling > Drilling
Set of stepped drills (item 425) in case425/1+425/3+425/6
- 4-30 mm
426 COUNTERSINKING CUTTERS
Power Tools > Drilling > Drilling
Countersinking cutters with three cutters HSS
426 MD ROTARY FILES
Power Tools > Drilling > Drilling
Rotary files made from hard metal- cross cut HM6
426 SB COUNTERSINKING CUTTERS HSS
Power Tools > Drilling > Drilling
Countersinking cutters HSS
426 SB/SP4-4 COUNTERSINKING WITH DISPLAY
Power Tools > Drilling > Drilling
Set of countersinking cutters in case426/SB1-426/SB2
426/SB3-426/SB4
- 2-20 mm
426 SP COUNTERSINKING 426 WITH DISPLAY
Power Tools > Drilling > Drilling
Set of countersinking cutters with three cutters (item 426) in caseGR 3-5-7-8-10-11
- 63-205 mm
438 BITS FOR DRILLING 1/4
Power Tools > Drilling > Drilling
Bits for drilling threading and countersinkingHSS 1/4" drive
450 HOLESAWS HSS BIMETAL
Power Tools > Drilling > Drilling
Holesaws HSS Bimetal
450 AL ARBORS FOR HOLESAWS
Power Tools > Drilling > Drilling
Arbors for holesaws
451 HOLE CUTTERS HSS ENTIRELY GROUND
Power Tools > Drilling > Drilling
Hole cutters HSS entirely ground
451 ARBORS FOR HOLE CUTTERS ITEM 451
Power Tools > Drilling > Drilling
Arbors for hole cutters item 451
451 PR EXTENSION FOR HOLE CUTTERS 451
Power Tools > Drilling > Drilling
Extension for hole cutters item 451
452 HOLE CUTTERS HARD METAL INSETS
Power Tools > Drilling > Drilling
Hole cutters with hard metal insets
452 GA ARBORS FOR HOLE CUTTERS 452
Power Tools > Drilling > Drilling
Arbors for hole cutters item 452
Drill Chucks
Power Tools > Drilling > Drilling
Long Slugger Bit 12mm
Power Tools > Drilling > Drilling
Short Slugger Bit
Power Tools > Drilling > Drilling
Holesaws and Arbors
Workshop > Drilling and Tapping > Drilling and Tapping